How to Make Your Own PeneXt Penis Enlargement Harness

Introductory Considerations

Although we spent pretty much effort to provide you with the following detailed instructions on how to make your own PeneXt harness, and whosoever you make effort your copy to be true copy of the original, you should be aware that you will in any case be deprived for some percent of comfort while using home made harness. Why? Factory-made piece that you can buy in our shop here is made of materials carefully searched for and selected through months of testing and trying.

E.g. desired rope softness and thickness i.e. rope loop that you place around the penis base we reached after a great number of tests in manufacture process with various materials for rope jacket and rope core, with various yarn thickness and yarn quantity. Once we met all the requirements that rope should meet that brought that protective pad (which acted on reduction of pressure to the skin from previously hard rope) was excluded from the original harness kit

If, for example, you notice that the rope you found in your store and used for making the rope loop pinches and presses, you have several solutions:

1. to snoop a little bit further at the rope stores in order to find some little bit softer,
2. to sew protective pad (but be aware that every new piece only excess and unneccessary burden for organism with additional material which can make you sweat, disturb you etc.),
3. to order in our shop original, for its concrete purpose after long testing manufactured rope.

You might be in the similar situation in a respect of silicones, regarding we use 4 different, for different stages of harness use, for various penis sizes and various penis stretching forces. And there are more such details...

Some of other factors you should consider too before you start go shopping for materials are complexity of harness manufacture process, tools you need to make it, but as well amount of time that you need to invest in the process of making harness itself. Start counting with your free time that you will spend in shopping looking for all the neccessary materials (it's not so probable that you will find everything in one place), and add working hours you will need to cut, prepare and join all constituent parts. Calculation is simple: it is between 1 and 2 working days, but only if you already had all the tools needed (sewing machine, hot air gun, electric drill, soldering gun...).

But, it's not that we discourage you, but we are only presenting the real facts, and since all these instructions on how to make harness are free, and since our primary idea when constructing this harness was to help man to finaly exceed ancient weakness in a respect to his masculinity, we will be glad that all those who like to make, and do not have enough money to afford themseves original PeneXt harness this way make them happy, and consequently make happy their's partners.

First, take a look what of the tools you need for making the complete harness before you go shopping for materials.

Only tools are marked in the picture, and list of materials and more details are given separately with each phase of making:

1. Sewing machine
2. Soldering Gun (for making of holes for adjusting rope loopies position)
3. Electric drill
4. Hot air gun, for shaping of plastic parts, (as a substitute bending in the hot water can be used) and (optional) heat-resistant gloves for protection of the skin when bending above mentioned.
5. Saw of fine gradation for cutting plastic pieces
6. (optionally) Rotating Sarpening stone (for easier and faster work with large plastic surfaces)
7. Classic vise
8. Carpentry clamps, two pieces (small and medium)
9. Drills several piecesнеколико пречника
10. Files smaller, for fine work with curvatures of plastic parts.